A burst supply line, an overflowing tub, or a storm surge under the back door doesn't wait for business hours, and neither do we. We dispatch Union units carrying industrial extraction pumps, air movers, and commercial dehumidifiers already loaded on the truck.
Hirex Water Damage started because homeowners in Union, WA kept telling us the same story: a national hotline picked up, put them on hold, and then subcontracted the job out to whoever was cheapest and closest. Every technician on our Union roster is a Hirex Water Damage employee, not a gig-app contractor pulled from a random directory.
Our crew leads carry IICRC water restoration certifications and have logged real hours on Category 1, 2, and 3 losses, so Water Damage Repair in Union isn't a side service we tacked on — it's the reason the company exists. Full liability coverage and Union, WA licensing back every job we take, so you're protected from the moment our truck pulls into the driveway.
We keep a stocked warehouse inside Union, WA so equipment never has to be trucked in from another region, which is the difference between a 45-minute arrival and a next-day one.
Talk to a Union property manager who's lived through an overnight pipe failure and they'll tell you exactly why a crew that arrives already equipped matters — every extra minute is more water in the framing. That's the gap Hirex Water Damage was built to close, one Union call at a time.
The most expensive Union restoration jobs we run almost never started as a dramatic flood; they started as something small that got put off. Here's what tells us a property needs professional attention rather than a mop and a fan:
If you're nodding along to any of these, get ahead of it now rather than later — our Union dispatcher will give you an honest read on urgency, not a sales pitch.
From a single soaked bedroom to a commercial building with three flooded floors, our Union teams are equipped to scale up or down — nothing gets a cookie-cutter response.
Truck-mounted extraction equipment on every Union rig pulls high volumes of standing water fast, so drying starts the same day instead of the next. Every extraction job includes moisture mapping so we know exactly which materials are still holding water once the visible flooding is gone.
Once water is out, we bring in commercial air movers and LGR dehumidifiers, positioned using psychrometric readings rather than guesswork, with daily drying logs so you can see the numbers improving, not just take our word for it.
For families in Union, this covers flood-cut drywall removal, subfloor evaluation, and packing out salvageable belongings for cleaning, with clear photo documentation at every stage for your insurance claim.
Union businesses and property managers get a dedicated project lead, after-hours crews, and equipment scaled to square footage rather than a single-crew response — we know a flooded lobby or a leaking unit above tenants below has to move fast.
Blackwater losses in Union get handled under strict Category 3 protocol: containment, PPE, antimicrobial application, and documented disposal of contaminated materials.
We apply antimicrobial treatment during every Union drying job specifically to head off mold before it starts, and we'll flag any area that needs deeper remediation.
Every Union estimate is written and explained before work begins — no vague "we'll see how it goes" pricing.
Our Union, WA warehouse keeps drying equipment close, which typically puts a Union tech at your door inside an hour.
We document everything with photos and moisture logs and work directly with your adjuster so you're not stuck translating restoration jargon.
We don't call a job finished until the moisture meter agrees, and if it doesn't, we return at no additional cost.
Tell our Union dispatcher what's happening — we'll ask a few quick questions to send the right equipment on the first trip.
A licensed technician heads to your Union address with extraction and drying equipment already loaded.
Standing water comes out first; drying equipment gets placed only after we've mapped exactly where moisture is hiding.
Daily moisture checks continue until every affected material reads dry, and you get a complete report at the end.
Our Union technicians use moisture meters at the start and the end of every job, and the final number has to hit the dry standard before we leave. If a callback shows lingering moisture within 30 days of a completed job, we return and correct it at no additional charge.
You'll find that exact commitment printed on your Union paperwork, not just mentioned over the phone. If a second visit is ever needed, it comes from the same crew that handled the original job whenever scheduling allows, since they already know the property and the readings we started from.
"We had standing water from a burst water heater and the technician showed up before I even finished mopping the entry way." — Danielle R.
"They dealt with my insurance adjuster directly and I didn't have to translate a single restoration term myself." — Marcus T.
"Appreciated getting real numbers each day instead of someone just saying 'looks good' and packing up." — Priya S.
"They worked overnight so our restaurant wasn't closed longer than it had to be. That mattered a lot to us." — Aaron W.
"Nobody wants to call about a sewage backup, but they walked me through the containment and PPE process calmly." — Lena G.
"The quote matched the final invoice exactly. No surprise charges tacked on at the end." — Sam O.
Because our equipment is staged inside Union, WA, most Union calls see a technician on-site within 60 to 90 minutes of the initial call.
We always quote first. You'll see a written estimate for the Union job before any drying equipment starts running.
Around-the-clock coverage in Union includes extraction, drying, and Category 3 sewage response — nothing on that list waits for morning.
Direct adjuster communication is standard — we send photo and moisture documentation formatted for a Union insurance claim.
We take moisture meter readings on affected materials and compare them against the dry standard for that material type — a visual check alone isn't enough.
Yes, our Union crews are trained and equipped for Category 3 blackwater response, including PPE and antimicrobial treatment.
Cut power to the affected area if there's standing water near outlets, and avoid walking through it until our Union tech confirms it's safe.
Yes, we regularly respond to commercial and multi-unit losses in Union, including retail, restaurants, and office space.
Drying time varies with material and how quickly extraction started, but 3 to 5 days is typical for most Union jobs.
Not if it's addressed quickly — mold generally needs 24-48 hours of sustained moisture, which is exactly why fast extraction matters.
Yes, if moisture readings aren't at dry standard when we finish, or a callback shows lingering moisture within 30 days, we return at no extra charge.
We cover Union and the surrounding zip codes listed below, plus neighboring communities throughout Union, WA.
Union is our home base, and our reach extends across Union, WA through a network of staged equipment and on-call technicians. If your address falls inside or near Union, a Hirex Water Damage crew can typically respond the same day.
— Embedded service-area map for Union, Union, WACall now and speak with a real Union dispatcher, not a national call center.
Call +1-844-578-1604